Hardbody (D21) Upper Control Arm - CROSS SHAFTS ONLY
SKU:
$0.00
Unavailable
per item
The custom cross shafts are machined from 6061 aluminum. When completed with the required parts, they provide far more caster/camber adjustment than can be obtained by shimming the stock UCA. They are designed to bolt into the factory position with the factory bolts.
The hardware in the pictures is not included and only shown for reference. This hardware is readily available from other sources, such as Speedway. The ball joint used is a Chrysler 772 unit and is available in many different configurations from other suppliers. The price is for a pair of cross shafts only, shipped in the US. I will provide a list of the rest of the parts, either via email or it will be made available on this site.
***NO LONGER AVAILABLE***
Several of the following images are from customers during the prototyping phase. There may be minor differences between the pictures and the items shipped due to changes made to improve the product.
Assembly
This is an 8 minute video to show how the parts get assembled when you receive your arm kit. Some parts may be different than what you receive due to design changes, upgrades or supplier differences. Fit and function will still be the same.
Parts list
If you are ordering just the cross shafts, you can download this Excel file that lists all the parts. Some of these parts are slightly different than what you see in the pictures. When I order parts, I order multiples so that they come up just a bit cheaper. If only ordering one set at a time, the ones on this list are less expensive. If you click on the part numbers, they should link you to the site/page where you can buy them.
I've added a second list. These are the parts that I used for the complete assemblies.
I've added a second list. These are the parts that I used for the complete assemblies.

hb_adj_uca_customer_parts.xlsx | |
File Size: | 24 kb |
File Type: | xlsx |

hb_adj_uca2_cust.xlsx | |
File Size: | 15 kb |
File Type: | xlsx |