• Products
    • D21 Adj UCA
    • 320/520/521/620 Disc Brake Kit >
      • Donor Vehicle and Part Information >
        • Hub Info
        • Rotors
        • Calipers
        • Hoses - Banjo Bolts
        • Master Cylinder
    • 320/520/521/620(drum) Urethane UCA Bushings
    • 311 Roadster Disc Brake Kit >
      • Caliper options
      • Breck Myers Manifold Blueprint
    • 1200 Disc Upgrade Kit
    • 411 Disc Brake Kit
    • Pushrod
    • Spacer for 320/520/521
    • L-Series Downpipe Flange
    • Wheel Spacers
  • Manuals
  • How To's
    • King pin rebuild info
    • Installations >
      • Truck Kit Install >
        • Stock Rims
      • Roadster Kit Install
    • 5 Lug Swap, Nissan D21 Hardbody
    • Automotive >
      • Headlight Switch Restoration
      • Differential / Rearend >
        • Spider Gear Swap
      • Wiper Repair - Servicing >
        • Wiper Blade - Replacing
      • Tension Rod Modification
      • Tie-rod removal
      • Brake Pad and Rotor Replacement
      • Ignition Switch
      • Weber DGV Rebuild
      • Ignition Wires
      • Electronic Ignition for E & J series engines
      • Steering Column Mods
    • General/Misc >
      • HF Electric Hoist Mount >
        • Misc Electric Hoist Info
      • Airbody saw blade option
      • Bending Brake for Shop Press
  • Misc
    • Spindle comparison 311-411
    • Big Brake, Ball Joint, 5 Lug
    • 410/411 brake upgrade pics
    • Eric Capps' 620 brake kit installed
    • Adjustable UCA
    • Ball Joint Info/Parts
    • Truck Firewall Steering Column Flange/Gasket
    • L-series Timing Chain Tension Retainer
    • Brake Kit CAD
    • Spindle Template for aluminum bracket
    • Weber Adapters
    • 9 x 20 CNC Lathe
    • Brake Master Cylinder Anatomy
    • 521 Wiring Schematics
    • RX-7 Auto-Manual Conversion Brackets
    • Misc Pics
    • Enco 1340 Reference
    • Vise Hold Down Blocks
  • Car Show Pics
    • Blue Lake 2012
    • Goodguys Spokane 2012
    • Rod Run Long Beach 2012
  • FAQ Page
  • Contact BHF
  • BlueHandsVideo
  BlueHandsFab.com

Welcome to BlueHandsFabrication!
​

***EFFECTIVE IMMEDIATELY, ABSOLUTELY NO SHIPPING OUTSIDE OF THE USA***

​
​
*****************************************************************
****     ALL PARTS ARE FOR SHOW USE ONLY!     ****
*****************************************************************

Buyer is completely responsible for correct installation, 
use of these products and any liability arising from their use.



PRODUCTS:

NISSAN Hardbody D21 

Hardbody D21 Adjustable Upper Control Arms (click for more info)    ***Group buy will start shortly** 

Hardbody (D21) Upper Control Arm Set(2 arms) - ​***Group buy will start shortly***
 
 

The custom cross shafts are machined from 6061 aluminum. When completed with the required parts, they provide far more caster/camber adjustment than can be obtained by shimming the stock UCA. They are designed to bolt into the factory position with the factory bolts.


The hardware in the pictures is only shown for reference. This hardware is readily available from other sources, such as Speedway. The ball joint used is a Chrysler 772 unit and is available in many different configurations from other suppliers. Click the "more info" link in the product title to view more info. At that bottom of that page are two spreadsheets that you can download that contain all of the parts needed to complete these arms.


If you'd like to be contacted in the event that a group buy for these is started, please CONTACT US.


***Group buy will start shortly***


​Kingpin Rebuild Kit - 320/520/521   **Will NOT work on the 620**   AVAILABLE

Kingpin Rebuild Kit $110
$
110.00    
 
 
This kit has the bushing holes modified to line up with the grease fitting in the spindle. It will include 4 extra shims, just in case. If you would like to order a second kit for future use or in case something doesn't go well on your rebuild, the price is $75. Must be ordered and shipped at the same time as the first kit.
A simple, but effective bushing removal/installation tool will be included with this order and shipped with the king pin kit).


THESE WILL NOT WORK FOR THE 620.
KP bushing tool info
​Spindle/King pin rebuild info
​CONTACT US TO PURCHASE


​
DATSUN TRUCKS - 320/520/521/620 (1963-1977) with drum brakes and king pins

​320/520/521 Aluminum Disc Brake Upgrade Kit​​ (click for more info)   ***Production will resume shortly***

320/520/521 Aluminum Disc Brake Upgrade Kit ***NO LONGER AVAILABLE***
$
0.00    
 
 

Kit allows later model hubs/rotors/calipers to mount onto the stock kingpin suspension with a simple modification to the spindle. This kit uses '87 D21 rotors, not 720 rotors as the previous kit did. Hubs from multiple years of Nissan trucks can be used, but some may require modification to clear the center holes of your rims. 

FOLLOW THE LINKS FOR MORE INFORMATION ABOUT THE ​HUBS, DONOR PARTS, AND ADDITIONAL PARTS REQUIRED.

This is the aluminum version of the previous steel kit, and does NOT require the wheel spacer to fit stock 14" steel rims.

Production will resume shortly.

click here for ADDITIONAL PARTS REQUIRED, NEW and DONOR

click here for INSTALLATION info


​
​620 Aluminum Disc Brake Upgrade Kit (only for drum (pre-'78) 620) (click for more info)   ***NO LONGER AVAILABLE***

620 Aluminum Disc Brake Upgrade Kit (only for drum (pre-'78) trucks) ***NO LONGER AVAILABLE***
$
0.00    
 
 

This is, basically, the same kit as the 320/520/521 kit, but with different inner bearing adapters and metric hardware. 



Kit allows later model hubs/rotors/calipers to mount onto the stock kingpin suspension with a simple modification to the spindle. This kit uses '87 D21 rotors, not 720 rotors as the previous kit did. Hubs from multiple years of Nissan trucks can be used, but some may require modification to clear the center holes of your rims. 

FOLLOW THE LINKS FOR MORE INFORMATION ABOUT THE HUBS, DONOR PARTS, AND ADDITIONAL PARTS REQUIRED.

This is the aluminum version of the previous steel kit, and does NOT require the wheel spacer to fit stock 14" steel rims.

Installed pics courtesy of Eric Capps. Thank you!

NO LONGER AVAILABLE

click here for ADDITIONAL PARTS REQUIRED, NEW and DONOR

click here for INSTALLATION info


​
​320/520/521/620(drum) Urethane UCA Bushings  ​(click for more info)       ***AVAILABLE***

320/520/521/620(drum) Urethane UCA Bushings (Black) $65
$
65.00    
 
 
This kit comes with 2 modified(machined ID and OD) Energy Suspension(ES) bushings (88A durometer), custom made UHMW Polyethylene washers and steel sleeves. The kit also includes 2 ES Formula 5 squeeze tube of grease and mounting hardware. The kit will do both sides of the vehicle. Only one tube of grease is req'd for assembly. The second is a spare, for replenishment later.
NEW INSTALLATION VIDEO!


CONTACT US TO PURCHASE
Master Cylinder Push rod - Datsun 521/520/320       $40 ***AVAILABLE***
$
40.00    
 
 

Whether running drum or disc brakes, changing the master cylinder to a dual circuit unit is a great safety upgrade. The stock push rods are not compatible with the newer, dual circuit m/c's. ​These have been created to use with the upgraded m/c. 

The drum equipped 620 already uses a dual circuit m/c and does not require a new pushrod.


CONTACT US TO PURCHASE


​
​Spacer Set for 320/520/521 Inner Bearing Replacement  (click for more info)​      ***AVAILABLE***
Spacer Set for 320/520/521 Inner Bearing Replacement $22
$
22.00    
 
 

The inner bearing for these models has been extremely hard to find. These spacers allow you to use the readily available inner bearings from the '72-'77 620's(drum equipped) trucks.


CONTACT US TO PURCHASE



​DATSUN 311 Roadster (already equipped with factory disc brakes)

​
​
311 Roadster Disc Brake Upgrade Kit ​ (click for more info)
          ***AVAILABLE***
311 Roadster Disc Brake Upgrade Kit $130    
$
130.00    
 
 

This kit is used to push the stock hub out far enough(approx. 1/8") so that a modified '96 Altima rotor can be mounted to the stock hub. The rotor needs to have the center hole opened up to fit the backside of the hub(approx. 3"). The rotors and machine work can be obtained elsewhere(locally) for US orders. They MUST be obtained locally for overseas orders. A stainless steel caliper spacer is used to mount/center Volvo calipers. This kit only fits the Roadsters already equipped with stock front disc brakes.

The feedback from customer is that the stock, dual reservoir master cylinder works well with this upgrade.

CONTACT US TO PURCHASE


​Option A: Modified Altima rotors for 311 Roadster Kit (pair)​         ***NO LONGER AVAILABLE*** 
Option A: modified Altima rotor(pair) (for 311 Roadster Kit) ***NO LONGER AVAILABLE***
$
0.00    
 
 

The center holes are opened up on the rotors to fit the backside of the stock hubs. These rotors will be made to order. The brand may vary due to availability. They will be stock Altima replacement rotors such as Centric or Raybestos.


NO LONGER AVAILABLE

CONTACT US TO PURCHASE


​
​DATSUN 410/411

​​410/411 Disc Brake Upgrade Kit (click for more info)           ***NO LONGER AVAILABLE*** 
411 Disc Brake Kit  ***NO LONGER AVAILABLE***
$
0.00    
 
 

This kit allows the mounting of the rotor/caliper from a '91-96 Infiniti G20 onto the stock drum spindle. The rotor requires the center hole to be opened up to clear the nose of the 411 hub.

NO LONGER AVAILABLE

You will need 14" rims or larger. Stock 13" rims WILL NOT fit.

NO LONGER AVAILABLE

Modified G20 rotor (pair) (for 411 non-SSS Kit) $130 ***NO LONGER AVAILABLE***
$
0.00    
 
 

The center holes are opened up on the rotors to fit over the nose on the front of the stock hubs.  New holes are drilled to better fit the studs, eliminating the need for the stud sleeves. The brand may vary due to availability. They will be stock Infiniti G20 replacement rotors such as Centric or Raybestos.

NO LONGER AVAILABLE


THIS OPTION IS NOT AVAILABLE OUTSIDE OF THE US.

NO LONGER AVAILABLE

Master Cylinder Push rod - Datsun 411 $40 ***AVAILABLE***
$
40.00    
 
 

Whether running drum or disc brakes, changing the master cylinder(m/c) to a dual circuit unit is a great safety upgrade. The stock push rods are not compatible with the newer, dual circuit m/c's. These have been created to use with the upgraded m/c. 

CONTACT US TO PURCHASE


​
​
​DATSUN - misc

L-Series(4 cyl) Exh Downpipe Flange 3/8" Mild Steel ***NO LONGER AVAILABLE***
$
0.00    
 
 

The stock down pipe flange is thin and warps easily. Any exhaust shop can make you a new down pipe with this flange.  


CONTACT Adam at FuzionFabricationllc@gmail.com if you are interested in one of these in stainless steel or if you want a downpipe made.


​1200 Disc Brake Upgrade kit (click for more info)  Contact Doug at 1200datparts@gmail.com
1200 Disc Upgrade Kit                                                      
 
 

Allows the mounting of the rear rotor(non vented) from an '84 Nissan 200sx and the front caliper from a 1984 NISSAN PULSAR NX 1.6L. The non-vented rotor was specifically used to keep the weight down.


If you're interested in this kit, please contact Doug at 1200datparts@gmail.com​


******* ALL PARTS ARE FOR SHOW USE ONLY! ****
***
Buyer is completely responsible for correct installation, 
use of these products and any liability arising from their use.
​

* U.S. shipping via USPS Flat Rate Priority is included in price. 
We are no longer shipping outside the US.
If multiple items can be combined, they will be and the difference in shipping
​will be refunded to the customer.